The sample inlaying machine can inlay improper samples in shape or size to meet the following sampling steps, to obtain required inspection surface, or to protect edges or surface defects caused in the course of sample preparation. In modern metallographic labs, semi-automatic or automatic grinding/polishing machines have a certain requirement in sample size, so the samples must be inlayed. The sample inlaying machine is an indispensable equipment in the metallographic labs. 

The machine is an automatic metallographic sample inlaying machine with cooling function, applicable to thermal inlaying of all materials (thermoset and thermoplasticity). Set inlaying parameters such as heating temperature, heat holding time, acting force, etc., put sample and inlaying materials, close the gland, press down the button, and then the machine can inlay automatically without a watchman. The machines may change four kinds of dies at will according to various requirements of samples, and also can press two samples simultaneously. 

1. Specification of Die: φ25mm, φ30mm, φ40mm, φ50mm

2. Power Supply: 220V 50HZ

3. Max. Power Consumption: 1600W

4. Setting of System Pressure: 0~2MPa (setting of sampling pressure: 0~72MPa)

5. Setting of Temperature: 0~300℃

6. Setting of Heat Holding Time: 0~99 min. 99 sec.

7. Dimensions: 615mm×510mm×500mm

8. Weight: 110kg

9. Type of Cooling: water-cooled