TMTECK Type II Reference Test Block Penetrant Test Block

Need A Quote ?

We love to hear from you !

Product details Parameters

3.jpg

Test standard: ISO  3452-3:1998（E），JIS  Z  2343-3:2001，ASME

Item Type: Type  II  Reference  Test  Block      


SPECIFICATION:   

All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the  requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated.

MATERIAL:      

Test Report according to ISO  10474-3.1.B,JIS  G  0415-3.1.B

Depth

100?m

Width(target  value)

0.5?m


Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled.


TRACEABLITY:  

Calibration standards used are traceable to international standards


CERTIFICATION THAT THE SUPPLIES /SERVICES DETAILED HEREON HAVE BEEN INSPECTED AND TESTED IN ACCORDANCE WITH THE CONDITIONS AND REQUIREMENTS OF THE CONTACT OR PURCHASE ORDER AND UNLESS OTHERWISE NOTED BELOW CONFORM IN ALL RESPECTS TO THE SPECIFICATION(S) , DRAWING(S), RELEVANT HERETO.



Close

Zoom Out

Zoom

Zoom In